Before you connect: does your laptop support video over USB-C?
Not every USB-C port can output video. The Plugable USB-C to DVI Adapter requires a host that supports USB 3.1 "Alternate Mode" (Alt Mode) for video output. This is a direct connection to your system's graphics processor, so performance is good—but only if your device supports it.
Many recent laptops do support Alt Mode, but most current phones and tablets with USB-C ports do not. Check your device's specifications or the manufacturer's documentation to confirm video output over USB-C. The adapter is plug-and-play on any Windows, Mac, or Linux host that supports DisplayPort Alternate Mode.
Known compatible systems (from Plugable's testing)
The following systems have been confirmed to work with the Plugable USB-C to DVI Adapter according to the manufacturer:
- Apple: MacBook Retina 12" (2016/2017), MacBook Pro (2016/2017), and 2017 iMac/iMac Pro.
- Dell: XPS 13 (9350, 9360) and XPS 15 (9550, 9560).
- Microsoft: Surface Book 2.
- Google: Pixelbook.
- Samsung: Galaxy S8 and S8+.
- Lenovo: ThinkPad P50.
Mac users: HDCP matters for DVI monitors
If you're connecting a DVI monitor to a Mac, the monitor must support HDCP copy protection. Some older DVI monitors do not support HDCP and may exhibit issues that make them unusable. This requirement applies only to macOS; if you install Windows via Boot Camp, DVI monitors without HDCP will work correctly.
Before you buy, check your monitor's specifications for HDCP support. If it's not listed, assume it may not be compatible with macOS.
Resolution limits: what to expect
The Plugable adapter supports DVI displays, but it is not compatible with Apple Cinema Displays or 2560x1440 monitors that require a dual-link DVI connection. Single-link DVI monitors (typically up to 1920x1200) should work, but always verify your monitor's requirements. If you have a high-resolution display that needs dual-link DVI, this adapter won't work.
Step-by-step: connect your DVI monitor
Once you've confirmed compatibility, setup is straightforward:
- Step 1: Power down: Turn off your laptop and monitor before making connections.
- Step 2: Connect the adapter: Plug the USB-C end of the Plugable adapter into your laptop's USB-C port.
- Step 3: Connect the DVI cable: Attach your monitor's DVI cable to the DVI port on the adapter.
- Step 4: Power on: Turn on the monitor, then your laptop. The display should be detected automatically.
- Step 5: Adjust display settings: If the monitor doesn't extend or mirror automatically, go to your operating system's display settings to configure it.
Product facts
- Plugable USB-C to DVI Adapter: Plugable USB-C to DVI Adapter connects a DVI display to a laptop, tablet, or desktop PC that supports USB 3.1 Alternate Mode for video output. This is the core requirement—without Alt Mode support, the adapter won't work.

Plugable USB-C to DVI Adapter - Plugable USB-C to DVI Adapter: Plug-and-play on any Windows, Mac, or Linux host that supports DisplayPort Alternate Mode. No drivers needed if your system supports the standard.
- Plugable USB-C to DVI Adapter: Not compatible with Apple Cinema Displays and 2560x1440 monitors that require a dual-link DVI connection. Check your monitor's DVI type before purchasing.
- Plugable USB-C to DVI Adapter: For Mac systems, the monitor must support HDCP copy protection; older DVI monitors without HDCP may not work. Mac users need to verify HDCP support to avoid a non-working setup.
When this adapter is the right choice
The Plugable USB-C to DVI Adapter is a simple, low-cost solution for connecting an older DVI monitor to a newer USB-C laptop. It's ideal if you have a single-link DVI monitor (up to 1920x1200) and a laptop that supports Alt Mode. It's not suitable for dual-link DVI displays or for Macs connected to non-HDCP monitors. If your laptop lacks Alt Mode, you'll need a different solution, such as a USB graphics adapter.


